Let’s find out what they have to offer for such a sharp price.

The boxes are decently finished with black vinyl. With a weight of a little more than 14 pounds, they are neither heavy nor light.

Plastic push-pin connectors are simple , but do the job and also at the rear, we find a bass-reflex port. The speaker units are covered with a black-cloth front, wich can be removed. The overall appearance is sober, but decent and sturdy.

So, what do these Sony`s sound like?

Sony`s SS-B3000 are easy to listen to and makes you want to listen to more.

These speakers sound musical, lively, dynamic, with warm mids, a tight bass and crisp highs.

The treble is a bit on the bright site and can be straining when listening over a long period of time , however, with a little positioning adjustments you will find this less prominent and hardly noticable.

Experimenting a little with the placement of the boxes away from the walls and corners, can also make a big improvement in the overall sound .

The Sony SS-B3000 are larger than your typical bookshelf speakers, but also produce a far bigger sound than smaller bookshelf speakers. When placed on stands, the result will be an even more coherent sound and tighter bass.

While the Sony SS-B3000 can handle all types of music with ease, including orchestral, they sound particulary convincing on modern electronic- and rock music presenting crisp highs and a deep and relatively wide sound stage.

The Sony SS-B3000 speakers can handle high volumes in mid sized rooms and can be used in a surround set as well as in a stereo set up. These speakers pair well with most entry-level amps and hometheater equipment.

To perform at their best, they need to be paired with higher quality amps.

Tech.Specs.

• 8 inch Kevlar-reinforced ( Highly Oriented Polyolefine) woofer,
• 3,25 inch Kevlar-reinforced ( Highly Oriented Polyolefine) midspeaker
• 1 inch Nano Fine Dome tweeter.

Using Kevlar at this price range is impressive, as Kevlar is normally used in far more expensive speakers. Kevlar is stronger and stiffer than prolypropylene and gives a neutral uncoloured higher quality reproduction of the sound .

The Nano Fine Dome Tweeter can handle up to 50 Khz.

• Frequency range: 50 – 50.000 Hz.
• Impedance:8 ohms
• Max. Power Input:120 W
• Sensitivity (efficience): 88dB
• Dimensions: Width: 9 inch, Height: 20 inch, Depth: 10 inch.
• Weight:14 pounds
• Shipping weight: 34 pounds

Conclusion?

The Sony SS-B3000 are an excellent buy in the $100,- range.

You will have to spend quite a bit more money, for a better deal. 

Click here to get 13% off the SS-B3000 speakers today on Amazon.com

What you get with the JBL MRX525, other than the quality of the sound, is the excellent design and durable build. This speaker is made for touring and playing at gigs, so needs to be strong enough to stand up to the punishment along the way, and that it certainly can do.

The look of the JBL MRX525 is also very good, the aesthetical design makes them look great to be part of the home décor if this is where you will have them situated. It is quite a large speaker, standing at 48.8 inches high.

A closer look at the JBL MRX525 speaker

Internal components

The JBL MRX525 has two 15 inch differential drive woofers, both at 265H. The combined power handling of these two woofers is 800 watts continuous. The 1.5 inch 2408H annular polymer diaphragm deals with the higher frequencies really well. The configuration of the internal components really gives the MRX525 the optimal sound quality across all frequencies.

Improved coverage

The coverage angle of the JBL MRX525 is 70 degrees, which is what makes this speaker ideal for using on stage for gigs. A large portion of the audience will get the best quality sound from the speaker when it is being used, with none of the sound dropping off within this range.

Using two of these speakers at a gig is going to give you all of the coverage you need for the audience to receive the full range of audio coming out of them, but not so wide that you get a big cross over if you position them at the correct angles.

Durable frame

The frame of the JBL MRX525 is made from thick plywood, and although this does add a lot of weight to the speaker, it also provides the durability it needs to play at its optimal level for a very long time. The external coating used on the speaker is JBL’s DuraFlexT, that provides a rugged finish to it and also adds to the strength of the speaker too.

The grille wraps are 16 gauge steel that provide plenty of protection for the softer components behind them. They also add to the look and overall design of the speaker too, so they are a beneficial addition to the build of the speaker.

Speaker dimensions

As mentioned previously, the JBL MRX525 is quite a large speaker, and needs to be if you are going to use it at different venues or in clubs. But you will be able to carry it from place to place when required, it is not so big that you will not be able to lift it on your own. The actual dimensions are as follows:

• Height = 48.75 inches
• Width = 21 inches
• Depth = 18 inches
• Weight = 38.3 KG

Final thoughts on the JBL MRX525 speaker

JBL makes some really good quality speakers, and the MRX525 is certainly no exception to that rule. The sound quality you get from this speaker is excellent across all ranges, and with the 70 degree coverage you get from it, this speaker is ideal for using on stage at venues or in clubs.

The design of the speaker has been clearly thought out, with attention to detail clearly evident. Although this speaker is around the $1000 range, you have to pay for quality, and the JBL MRX525 is certainly worth every penny of its price tag for sure.

Get 17% off the MRX525 today on Amazon.com – Click here to find out more

The compact design of the Yamaha MSP3 speakers does not detract from the quality of the sound they produce. They are very well designed and are very durable speakers. They also look very good too and will certainly fit well into most audio set up configurations well.

The versatility of the Yamaha MSP3 monitor speaker system gives you the added advantage of being able to use them across multiple platforms. They can be very quickly installed into any system, and they are small enough to be moved around to wherever you need them located.

Although small, the Yamaha MSP3 speakers are quite heavy for their size. They weigh about 4.5KG, so they are certainly not flimsy speakers, and the extra weight implies the quality that is used to build them.

Let’s take a closer look at the Yamaha MSP3 speakers

Clarity of sound

The sound you get out of the Yamaha MSP3 speakers is very clear. The weight of the speakers ensures that they do not jump around when the bass increases, and this leads to a more consistent overall sound quality.

The 20 Watt amplifier in each speaker is used to drive both the 4 inch cone speaker and the 7/8 inch tweeter. The configuration of these components within the overall design is such that it gives the best delivery of the audio for any system they are plugged into.

Yamaha uses a design system they call Waveguide technology to disperse the high frequency of the speaker’s tweeter. The bass reflex body of the Yamaha MSP3 also helps to get the best quality of sound produced from within the speakers.

Connectivity

The balanced XLR input in each unit allows for easy connection with a variety of audio sources, and it also makes for a very quick and easy installation into any of these sources too. Even when connecting to professional standard equipment you have the balanced phone jack input, and RCA jack input that is unbalanced.

Separate volume controls

It is possible to have these speakers plugged into two different audio sources at the same time, and with the dual volume controls, you can determine which source you want to listen too, and also balance them if you require also.

Final thoughts on the Yamaha MSP3 speakers

If you are looking for a smaller pair of speakers to use for your system at home, whether it is for a computer, or a home theater or music system, these MSP3 speakers provide an excellent option for you. The quality of the sound is very good. Due to their compact size, the bass will never be overpowering, so if you wanted to increase the bass you would want to get a separate sub woofer.

The versatility that these speakers provide will certainly be a benefit to many, and the fact that you can have them plugged into two separate audio sources at the same time will really appeal to some also. Overall, the Yamaha MSP3 speakers provide really good quality sound and are an excellent speaker set for the price that they cost.

Click here to get 21% off the MSP3 speakers today on Amazon

The Sony SSF-5000 speakers have been designed so that they recreate a massive range of tones as closely and clearly as possible. The sound quality is excellent for a set of speakers at this price. If you are looking for extreme bass, then you may want to get a separate sub woofer, but the bass, treble and quality of sound that they do produce will surpass the expectations of most looking at speakers in this class.

The flexibility you have with these speakers to will allow you to either fit them in with an already existing speaker configuration you have, or you can use them as standalone speakers if you like. They are good enough to be used on their own if this is what you plan for them, they will work very well with a home theater set up.

A closer look at the Sony SSF-5000 speakers

Size of the speakers

These speakers are quite big. They are floor standing speakers, so you can expect them to be quite tall. They do not have such a big foot print, so you will be able to fit them in most areas in your room easily enough, so you can get the best sound from them. The actual dimension for each speaker is as follows:

• Height = 33.5 inches
• Depth = 10.4 inches
• Width = 9.5 inches

Quality of the design and build

The Sony SSF-5000 speakers have been really well made. The finish on them is very good quality, so they will look good wherever they are located in your room. Each speaker has an 8 inch mica reinforced woofer, a 3.25 inch mid driver and a 1 inch Nano fine balance dome tweeter. The way the three individual components are configured within the speaker design helps to optimize the output.

The casing for the speakers is made from thick MDF, so the construction is very solid and will add to the durability of the Sony SSF-5000 speakers. They come in black, as this tends to be the most popular color for floor standing speakers, and they go with most décor too.

Specifications

The following are the technical specifications for the Sony SSF-5000 speakers, that helps to produce the quality of the sound:

• Frequency response curve – 45 – 50,000Hz
• Audio sensitivity – 88 db
• RMS power range – 150 watts
• Impedance – 8 ohm

Final thoughts on the Sony SSF-5000 speakers

You are not going to get the same quality of sound out of these speakers as you are from a $1000 set, but if you are looking in the $100 to $200 price range you will struggle to find many speakers that produce better sound quality than these. The Sony SSF-5000 speakers are another excellent speaker set from Sony, and ideal for using for gaming, or linking up to your home theater.

Click here to get 25% off the SSF-5000 speakers today

The JRX125, although ‘portable’, is a big and heavy speaker. But this thing delivers in every way you hope a good quality speaker will. When you first here the sound it can produce you will really begin to appreciate the quality that has gone into this speaker design.

The JBL JRX125 is a very robust and well built speaker that will certainly be able to take a few knocks on the way if you need to take it from place to place for gigs. The main frame of the speaker is made from 19mm MDF, and is acoustically sound and provides an improved LF performance.

The speaker comprises of two JBL 15 inch drivers, and a 2.5 inch edge wound voice coil. This disperses the power handling better and improves the overall efficiency for the speaker. The quasi 3 way crossover design provides additional bas from the two woofers.

A closer look at the JBL JRX125

Performance enhancement

To help provide the absolute best quality sound from the JRX125, JBL has included a compression drive that is cooled by Ferro-fluid. It has a titanium diaphragm and it helps to improve the overall reliability of the speaker, as well as enhancing the high frequency performance of it too.

To shape the frequency in a more proficient way, the advanced topology network crossover design works to improve this and deliver a coherent summation in the crossover region. This is another design feature that really helps the overall audio delivery quality.

Reduced distortion

The progressive transition high frequency waveguide in the JBL JRX125 helps to produce a better coverage control, and also greatly reduces any distortion. This is one of the reasons behind the extra clear sound and amazing quality of the JRX125 speaker.

Superior acoustics

To help optimize the acoustics in the JBL JRX125, the enclosure has been put together with advanced adhesives and also mechanical fastener technology to keep the framework solid. It is this attention to detail throughout the speaker design that leads to the superb audio quality it provides.

Added protection

You may want the JBL JRX125 speaker just to use at home and if this is the case you will probably not be moving it around too much. But this speaker is certainly of the quality that it can be used for gigs, so if you intend it for this you are going to want the speaker to be robust and solidly built.

The front of the speaker is covered with an 18 gauge perforated steel grille that ensures the more fragile components are kept safe from any knocks it may take while it is in transit. The overall design of the JRX125 is really solid, and considering the speaker weighs just under 100 pounds, you can see how well built it is.

Speaker dimensions

These are the actual dimensions of the speaker:

• Width = 18.3 inches
• Depth = 16.8 inches
• Height = 43 inches
• Weight = 94 pounds

Final thoughts on the JBL JRX125

The quality of this speaker is very apparent when you first hear them. The overall design has been extremely well thought out and implemented. For the price of the JBL JRX125 you get an incredible amount of innovation and quality, and this speaker has been earning rave reviews because of this.

Click here to get your 26% discount today